药智官方微信
药智官方微博
产品名称： 细菌酸甲酯 (BAME) 混标 规 格： Sigma-Aldrich 产品备注： Sigma-Aldrich 产品类别： 化学试剂 产 品 说 明 产品编号 47080-U | Supelco 国内现货 细菌酸甲酯 (BAME) 混标 Bacterial Acid Methyl Ester (BAME) Mix solution (10 mg/mL total concentration in methyl caproate), analytical standard grade analytical standard form solution (10 mg/mL total concentration in methyl caproate) packaging ampule of 1 mL storage temp.
Standards for Sulfur in Diesel Fuel Analysis： Full-range of Sulfur Standards for XRF. ASTM Methods D2622, D4294, D5453, D7039, D7212, D7220 and others. Matrix: See Below Volume: 100mL Concentration Light Mineral Oil Heavy Mineral Oil #2 Diesel Fuel (μg/g) (wt%) Product No. Product No. Product No. Blank Blank SXF20MIN-BLK-100 SXFMIN-BLK-100 SXFDSL-BLK-100 5 0.0005 SXF20MIN-5-100 SXFMIN-5-100 SXFDSL-5-100 10 0.001 SXF20MIN-10-100 SXFMIN-10-100 SXFDSL-10-100 15 0.0015 SXF20MIN-15-100 SXFMIN-15-100 SXFDSL-15-100 20 0.002 SXF20MIN-20-100 SXFMIN-20-100 SXFDSL-20-100 25 0.0025 SXF20MIN-25-100 SXFMIN-25-100 SXFDSL-25-100 50 0.005 SXF20MIN-50-100 SXFMIN-50-100 SXFDSL-50-100 75 0.0075 SXF20MIN-75-100 SXFMIN-75-100 SXFDSL-75-100 100 0.01 SXF20MIN-100-100 SXFMIN-100-100 SXFDSL-100-100 200 0.02 SXF20MIN-200-100 SXFMIN-200-100 SXFDSL-200-100 300 0.03 SXF20MIN-300-100 SXFMIN-300-100 SXFDSL-300-100 400 0.04 SXF20MIN-400-100 SXFMIN-400-100 SXFDSL-400-100 500 0.05 SXF20MIN-500-100 SXFMIN-500-100 SXFDSL-500-100 750 0.075 SXF20MIN-750-100 SXFMIN-750-100 SXFDSL-750-100 1000 0.1 SXF20MIN-1000-100 SXFMIN-1000-100 SXFDSL-1000-100 1500 0.15 SXF20MIN-1500-100 SXFMIN-1500-100 SXFDSL-1500-100 3000 0.3 SXF20MIN-3000-100 SXFMIN-3000-100 SXFDSL-3000-100 5000 0.5 SXF20MIN-5000-100 SXFMIN-5000-100 SXFDSL-5000-100 7500 0.75 SXF20MIN-7500-100 SXFMIN-7500-100 SXFDSL-7500-100 10,000 1 SXF20MIN-1%-100 SXFMIN-1%-100 SXFDSL-1%-100 20,000 2 SXF20MIN-2%-100 SXFMIN-2%-100 SXFDSL-2%-100 30,000 3 SXF20MIN-3%-100 SXFMIN-3%-100 SXFDSL-3%-100 40,000 4 SXF20MIN-4%-100 SXFMIN-4%-100 SXFDSL-4%-100 50,000 5 SXF20MIN-5%-100 SXFMIN-5%-100 SXFDSL-5%-100 美国VHG Labs参考物质及标样主要包括：1. 氮，硫，氯，金属标准；2. 标准废油分析，单元素磨损金属有机标准，多元素金属磨损标准，内部标准，金属添加剂标准，基体空白和溶剂，稳定磨损金属标准，多元素冷却剂标准，燃料稀释标准，裂纹检测的参考标准，卡尔费休滴定认证参考标准，烟尘含量标准；3.油品物理测试标准：闪点参考资料，粘度参考标准，降凝剂参考资料，浊点参考资料，冰点参考资料，蒸馏标准等。 北京美同达代理美国销售VHG品牌所有系列标准油，超低折扣，超惠价格！ 详情请致电：010-88482632/52457812/52457811
Impact Standards: Charpy V-Notch and Izod Impact Specimens These SRMs are test specimens intended primarily for the verification of Charpy V-Notch testing machines and Izod testing machines. The dimensions of these SRMs comply with the current ASTM Standard E23 and the current ISO 148-1 Standard. SRMs 2092, 2096, and 2098 are NIST-Verification Charpy V-notch specimens that have a post-test evaluation service and proficiency test data available with them. SRMs 2092 and 2096 are to be tested at -40° C; SRM 2098 is to be tested at room temperature (21 °C). These SRMs should be tested (broken) at the same time, then returned to NIST Boulder for evaluation. An acceptable machine will produce an average value within 1.4 J or 5% of the certified energy value, whichever is greater. SRM2092、2096和2098是NIST SRMs 2093 and 2097 are Self-Verification Charpy V-notch specimens that do not have any post-test services available with them. These SRMs provide a lower cost option for the Self-Service user. SRMs 2093 and 2097 are to be tested at -40° C; These SRMs are not returned to NIST Boulder for evaluation. SRMs 2112 and 2113 are NIST-Verification Charpy V-notch specimens that are certified for absorbed energy at two test temperatures and are also certified for maximum force. These SRMs provide a means to verify the performance of the energy and force scales of an instrumented Charpy impact machine at room temperature (21 °C). They can also be used to verify just the energy scale of a machine at -40° C, interchangeably with SRMs 2092 and 2096. Theses SRMs should be tested (broken) at the same time, then returned to NIST Boulder for evaluation. An acceptable machine will produce an average value within 1.4 J or 5% of the certified energy value, whichever is greater. Currently formal bounds are not available to verify the performance of the force scale for a Charpy impact test machine. SRM 2115 is a NIST Izod specimen. Each SRM consists of a set of specimens needed to perform one evaluation. This SRM complies with ASTM Standard E23 dimensional requirements for the Izod (Cantilever Beam) impact specimen, Type D, geometry. PLEASE NOTE: The tables are presented to facilitate comparisons among a family of materials to help customers select the best SRM for their needs. For specific values and uncertainties, the certificate is the only official source. - Certified values are normal font - Reference values are italicized - Values in parentheses are for information only 货号 品名 包装 能量 2092 Low-Energy Charpy V-Notch Impact Specimen (NIST-Verification) 低能量夏比V型缺口冲击试样（NIST-验证） set 13 to 20 2093 Low Energy Charpy V-Notch Impact Specimen (Self- Verification) 低能量夏比V型缺口冲击试样（自我-验证） 5bar 2096 High-Energy Charpy V-Notch Impact Specimen (NIST-Verification) 高能量夏比V型缺口冲击试样（NIST-验证） set 88 to 133 2097 High Energy Charpy V Notch Impact Specimen (Self-Verification) 高能量夏比V型缺口冲击试样（自我-验证） 5bar 2098 SuperHigh-Energy Charpy V-Notch Impact Specimen (NIST-Verification) 超高能量夏比V型缺口冲击试样（NIST-验证） set 176 to 244 2112 Dynamic Impact Force Verific Specimens (Nominal 24kN) 动态冲击力Verific 试样（额定受力24千牛顿） set of four 2113 Dynamic Impact Force Verific, Specimens (Nominal 33kN) 动态冲击力Verific 试样（额定受力33千牛顿） set of four 2115 Low Energy Izod Impact Specimen (NIST-Verification) 低能量艾氏冲击试样（NIST-验证） Set 13 to 25
VWR庐 Digital Mini Incubator The VWR庐 digital incubator offers an economical and space saving solution for microbiology or haematology applications. The temperature can be freely adjusted in increments of 0.1 掳C up to a maximum of 70 掳C. Heating elements are incorporated into the housing base and walls to ensure temperature stability and uniformity. The door of the incubator has a transparent plexiglas庐 window to provide full visibility to samples. The housing and door frame are constructed entirely of epoxy coated mild steel for strength and durability. Digital controls. Personal-sized. The 230V model is CE marked. 鍙傛暟Exterior Dimensions 11.2 x 11 x 13.2"Interior Dimensions 9.0 x 8.7 x 7.9"Temperature Accuracy 卤0.5 at 37掳CTemperature Range Ambient +5掳C to +70掳CTemperature Uniformity 卤0.5 at 37掳CWeight 18 lbs.鍨嬪彿Electrical Capacity VWR Catalog Number Unit230V 10 L 10054-476 Each閰嶄欢鍒嗛殧鏋
Cannon认证粘度检查油CANNON Check Oils/CANNON认证粘度检查油ASTM D445, ASTM D5293, ASTM D4684, ASTM D56, ASTM D92, ASTM D93CVCO-5W30 CVCO-10W30 CVCO-15W40
